Jump to content
The Classic Speaker Pages Discussion Forums

Tunedguy57

Members
  • Content Count

    7
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Tunedguy57

  • Rank
    Newbie
  • Birthday 01/07/1957

Profile Information

  • Gender
    Male
  • Location
    North Italy
  • Interests
    Vintage audio gear restoring and collecting. Especially US and GB made.

Recent Profile Visitors

392 profile views
  1. @ra.ra About 4xa I wrote "someway unlucky". And IMO it was, I agree with you about strategies of AR for this model. Personally I prefer the sound of 4x: more smooth and natural human voices. I don't want criticize the Allison's tweeter, actually a beautiful one. About the 6 different performances: even if I do understand that nowadays can be nice comparing and listening different versions, I judge somewhat uncorrect from a serious speaker-maker selling different products with the same name.
  2. IHMO the presence of a glue ring is a normal consequence of assembling procedures, partially automatized. Thickness of the paper of cone from coil to edge normally decrease, and there is no practical need of an heavier edge. Instead, it's desiderable a lighter one, to prevent dynamic shock of the cone surface, and breaking-up phenomena.
  3. I agree, absolutely, usually various version of speaker have had a new suffix ( 2a, 2ax, 2x, 4x, 4ax) but 6 in its various issues never had anything to say: "I' m a new version!" . So one can have in his hands a minimalist 6 ( european, only one capacitor for tweeter) or a much more complex 6 with a completely different xover. It could be ok, if they should sound similar, but unfortunately they don't.
  4. I remember a post from RoyC where he wondered if AR was ever satisfied of 6 model. I think he was right. Since there are not less than four version of 6. Woofer and xover change during six-seven years of production. So things are some confused on their performance. In my opinion it should need specify first which version we are speaking about. My first 6 (european made in Holland) had only a 6 uF capacitor for tweeter and a switchable resistor. No coil, no pot, nothing. Other pair I got later had a coil for woofer and a 10ohm resistor across it. First series had an alnico magnet woofer. Later it was ceramic. I loved 6, but it has been a difficult love. It was anyway my first love. Now I have 4x, 3a, 5, 6, 7 and I do love all of them.
  5. If original and well working I'd keep 6' as first choice. But it should be interesting to know what woofers are mounted on your 4ax. Original ones had cloth surrounds and are not interchangeable with 6' ones, being their Fs about 37Hz, instead 24Hz of those on 6 model. IHMO 4ax was an unlucky version, some way worse than previous 4x. Regards. Tunedguy57
  6. Tunedguy57

    A25 mods

    I got my first A25's in 1975. They came with standard SEAS alnico woofers and H87 . One year later unfortunately swap them for A25XL. No bad but not that better than previous A25. Middle range less natural, even if more power handling. Soon I sold them and got AR6. Many years later, during 1985 I bought again a pair of A25, in excellent shape. Surprisingly I found inside a ceramic magnet woofer. That one mounted in XL model. Very nice compound! The speakers were much more powerful with a little bit more sensitivity in woofer range. After having renewed the capacitor with a polyester 5uF, I have been using them for years. Recently I was intrigued in some slight mods. So for whom having in their A25 ceramic+alnico mix, I give my tips to make, IHMO, A25 better. First: Place a 6uF capacitor instead standard value 5uF. Second: put a 0.39uF capacitor across the 2.2 ohm resistor series connected with tweeter. The first mod gives a much more smooth mid range. The second one lifts a little ( actually a very little bit) the emission of high frequencies above 12khz. Comparing these modded 25's with other speakers of my collection ( AR3a, KLH six, AR6 and many other) they sound really great, even if not better than AR3a, obviously. If you have a A25 with ceramic woofer, try and listen! Regards Tunedguy57
  7. Hi, those "Industrial cond.corp" capacitors were mounted by factory....were really fine and well sounding (paper in oil) but after 40 (or more) years can have gone out of tolerance. In particular it's not so rare their value has become more than 50%. It's a dangerous situation for tweeter! In order to fix your 4x's I should change both with a parallel of a 15uF and a 4.7uF plastic film. I should avoid a 22uF. Better not to stress your valuable tweeters. Best results could be obtained with paper in oil, but they are somewhat expensive nowadays. PS: it s not so rare finding in old AR boxes different capacitors. In particular can be found Industrial paper in oil and NP electrolytics (often by Sprague). They mounted indifferently both so your pair may have both inside. tunedguy57
×
×
  • Create New...