Jump to content
The Classic Speaker Pages Discussion Forums
Adamo0926

Need help removing mid and tweeter from L810

Recommended Posts

Working on a pair of L810s, one speaker needs all the drivers replaced.  Found all the replacement drivers from Ebay.  The woofers came out easily.  But I have no idea how to get the mid-range driver out of the cabinet.  There are 4 screws around the perimeter of the faceplate and 4 screws right around the dome.  It seems those 4 inner screws around the dome are the screws that hold the magnet in place.  So I would think removing the 4 screws around the perimeter would allow for the faceplate to come off with the dome and magnet intact.  But the faceplate does not want to budge.  I don't want to force it because I don't want to chip the baffle.  Obviously since the driver is shot if that were to get damaged no big deal.

Can someone tell me if there is some trick to getting the mid out of the cabinet ?  I haven't even tried taking out the tweeter yet.  Is the faceplate also glued on as well as screwed on ?  I'm at a loss.

Thanks for any help you can give me.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...