Jump to content
The Classic Speaker Pages Discussion Forums
Sign in to follow this  
Glitch

Riveted Tinsel Wire Terminals

Recommended Posts

I've been working on restoring a pair of speakers.  Upon taking them apart, I found this...

Wire_1b.jpg.8be04c7a02f1f000c384f1ce3cf09e03.jpg

Wire_1c.jpg.673de6015d0564a7ecacd7d7813a1dd8.jpg

And on the other side, this is what I have...

Wire_2a.jpg.6f764cc0aa0fb389cb5b9352a936d152.jpg

The good news is that I found out why the speaker was buzzing. ;)

The other woofer was much better and still had the stock terminals.

Stock_2.jpg.3e569b090a8058de328c6b7ba474f6ab.jpg

Stock_1.jpg.dff5ff38d972e1b3db3e8c2b5101e06b.jpg

I've cobbled together a temporary solution.

Parts.jpg.de0f6925f365b14f0f34158a3e7686e7.jpg

New_1.jpg.cef7127515dbee1ab783cc17bf065488.jpg

I'll use some Locktite on the nut for now, but can apply some solder between the nut and bolt if I want the connection to be permanent.

I'd like to restore the first speaker to something closer to the stock connector.  I've already spent hours searching the web for a suitable replacement.  I haven't found anything that is even close.  Does anyone know a source for this type of riveted tinsel wire terminals? 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...