Jump to content
The Classic Speaker Pages Discussion Forums
Sign in to follow this  
scottynconnie

Advent legacy

Recommended Posts

I don't think you really need serial numbers to identify the version you may have, you can tell by appearance (but to answer your specific question, I have no idea how to read Jensen/Advent serial numbers)

But I do know all you have to do is just look at them

The tweeter mounting flange (style and size) and a few other minor details like the badge being on the kick panel on the last incarnation instead of the tweeter

They all were a 10" woofer 1" ferrofluid cooled tweeter design built by Jenesn 

Just google advent legacy, you'll get all the results you need

For what it's worth - back around 2008 it was raining Legacys around here and I wound up re-edging and selling/giving away more than a few pairs

Don't think there is a great deal of difference between the versions I, II or III

It's a good woofer to do your first re-edge on if you've never done one

First ones I ever did

I had two pair with smooth cones and the rest ribbed - all were original owner speakers (just purchased at different times) with correct parts so you may see them either way and both are correct

If you are shopping a used pair, no matter the incarnation, after you get them, make sure those screws closest to the tweeter domes are snug - they all work loose over time and eventually the fluid can leak out as well as lead to other tweeter issues (that you can hear)

I have fixed more than a few problems with this simple solution, don't be shy, just a gentle tightening is all they need (I've never had a bad one)  

The dome proper is in fact a part of that decorative flange

Just a gentle snug

Craig

 

 

Share this post


Link to post
Share on other sites
On 2/7/2018 at 8:08 PM, scottynconnie said:

Can play loud, reasonably clean sounding speaker, not a lot of inner detail (which is important to me) but gets the job done decently and is a durable build

Decent bottom end and the tweeter is capable

And as is the case with ANY loudspeaker system, how "good" it sounds will be source depenedent as much as anything

I bought them, re-foamed them, road tested them for a week and then sold them, everyone that bought a pair from me came back to say how happy they were (mostly middle aged men)  Sold one woman a pair, she too was pleased 

Often sold them a receiver too (folks wanting to "get back into it" - relive the college days, play records again type deals)

Typical amplification being stuff like Marantz 2220Bs or the Pioneer SX-780s  and the like (which 12 years ago you/I could buy all day long for a $100 or less - them days are long gone)

My buyers' Musical tastes ran the gamut

So, typical late 1970s early early '80s decent stereo

Just a good quality American made utility speaker from back when those were a reality

I never did try them with tubes so all my comments pertain to sand amps only - again, appropriate for their time

For a pair that needed surrounds I would never pay more than $25 and after I serviced them I sell/sold then for between $125 and $200 depending on condition

Always used Rick Cobb's surrounds 

Most of them show up in good shape because they're built of construction site type materials

Craig

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×