steelglam Posted November 29, 2015 Report Share Posted November 29, 2015 Hello all,I took some measurements of the drivers on my AR-90s today to see if they are within spec. I know that the woofers are 8 ohms, and my measurements of the DC resistance in the ones in my AR90s were within spec.But I'm not sure of the impedance of the tweeter, upper mid, and lower mid. Here are the readings I took of the DC resistance for these drivers:Right speaker-Tweeter: 3.5 ohms-Upper mid: 3.3 ohms-Lower mid: 5 ohmsLeft speaker-Tweeter: 3.5 ohms-Upper mid: 3.5 ohms-Lower mid: 4.8/4.9 ohmsDo they look OK? I.e. do these readings indicate that the drivers are within spec?I appreciate any insight in advance! Link to comment Share on other sites More sharing options...
DavidR Posted November 29, 2015 Report Share Posted November 29, 2015 Look like my AR90 drivers' DCRs. I would say normal.Two of my woofers measured around 7 ohms, the other two were around 6.8/6.7 IIRC. Link to comment Share on other sites More sharing options...
steelglam Posted December 2, 2015 Author Report Share Posted December 2, 2015 Look like my AR90 drivers' DCRs. I would say normal.Two of my woofers measured around 7 ohms, the other two were around 6.8/6.7 IIRC.Thanks, DavidR! Glad to hear that my drivers are normal. Link to comment Share on other sites More sharing options...
DavidDru Posted December 2, 2015 Report Share Posted December 2, 2015 Gotta love normal drivers! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.