Baski, A word of advice, be careful when you put the crossovers back in the cabinets. I forgot one of the insulating washers when I first put mine back together and I almost blew up the left channel of my power amp. Luckily a couple fuses blew and saved it. Its also a good idea to read the impedance across the terminals to make sure they are in an acceptable range for your amp. I think my XO's with Dayton/Solen caps measured under 4 ohm at rest. Also, be careful on the dual cap. I assumed I knew which way it went on my first recap and had some issues. Double check the schematic there. I have attached an image of one of my finished set of boards for reference in case you have not yet started, it may come in handy for cap placement. Any questions at all on the process let me know. I am just about to start my 4th Model Five Recap. -Ben