1 reply to this topic
#1
Shacky
-
- Members
-
- 373 posts
Advanced Member
Posted 06 July 2009 - 01:34 AM
I'm finishing up an EPI 202 project. All 4 grills are broken but certainly useable as templates. I want a professional looking reproduction. Where can I get these made for me? I'm OK doing cloth application myself.
#2
JKent
-
- Members
-
- 2,193 posts
Advanced Member
- Gender:Male
- Location:Northwest NJ
Posted 06 July 2009 - 03:03 AM
Hey Shack
Have you considered reinforcing them with fiberglass cloth and resin? I was able to salvage some broken AR2 grille boards by laminating some brown paper over the break with epoxy. I put a piece of wax paper over the patch so I could weigh it down to flatten as it cured, then trimmed it a bit the next day.
Good luck.
Kent
Have you considered reinforcing them with fiberglass cloth and resin? I was able to salvage some broken AR2 grille boards by laminating some brown paper over the break with epoxy. I put a piece of wax paper over the patch so I could weigh it down to flatten as it cured, then trimmed it a bit the next day.
Good luck.
Kent
J. Kent Hollingsworth
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
